Ringing in the New Year - Hanging New Blinds

Happy New Year! I love January 1st. It is a new beginning, with new goals, resolutions and a chance to start fresh.

We had an open house style party on New Year's Day. I was talking with my friend Leslie about how little changes can really make a big difference in your home and attitude. It is better to make some small alterations to your home instead of waiting to make bigger changes. We all have many reasons for waiting:

• Lacking Money
• Lack the skills
• Lacking a vision
• Lacking time
• Lacking motivation
• Insert your own reason here!

When we first moved into our home I didn't want to do anything to our master bathroom because I knew we would need to gut it one day.

But, I can't tell you how awful I felt every morning as I stepped into that hideous bathroom.

Finally I stopped waiting and made a few changes. I didn't rip out the tile, I just added some paint, stain and new fixtures. And it really made me happy! Sure I still have to step into a harvest gold tile coffin to shower. And I will have to wait until we have the funds to renovate the room one day. But, at least that room makes me happy for now.

So, in the spirit of a fresh start, I decided to give our Master Bedroom a little face lift this week.

Our bedroom was the first room we painted when we moved in, and I stopped loving the room last year. Especially when these showed up!

Yuck, I'm not sure how our roman shades got stained. I think it might have been from the vaporizer I run in our bedroom because I can't find any other places where water could have penetrated the window.

I admit, I was in a holding pattern. I found myself stalling, thinking that I had to wait until we scraped our ceilings. Then we could re-do that room.

 

The truth is that I had all the supplies to give our room a mini-facelift. Back when Layla posted about her new window treatment in her master bedroom, I was all eyes!

Our bed is situated in the same location as her's (in front of two windows.) I had struggled with what to do with our bed and those window until I read her post. Luckily, I was able to find these natural grass shades at Bed, Bath & Beyond on clearance. $9.99 per blind! SCORE!

Thank you Layla@TheLetteredCottage for sharing your window treatments!

But, I waited another 2 months to do anything with those blinds! Sheesh, I can't believe it took me that long to pull on my big girl "go ahead and do it" panties?

I started by removing the old stained blinds. Sadly I sewed them myself only three years ago. Sniff, sniff.

Then, I held up the new blinds to the height I wanted them. I hung them higher than the window to give the illusion that the window was taller, and also to be sure not to block too much natural light from the room.

Made a mark on the wall with pencil.

Next, I used a level to mark a line across the whole window.

I measured the width of my blinds and held up the first bracket at one end. Lucky for me I had already located a stud near the one end of the blind. (Read about stud finding HERE.)

Here is the first trick you NEED TO KNOW about hanging any window treatments! Those screws that come with blinds will not hold up your window treatments over the long haul even if you are screwing them into a stud. Especially if you have small children that may try to play Tarzan on them one day.

The wimpy 1" screws are not long enough to go through the drywall and into your studs. And DO NOT expect them to hold if they are simply screwed into drywall either.

Be sure to purchase some extra drywall or wood screws that are 2" long.

Also have some of these wall anchors on hand at all times! They screw into the wall when a stud is not behind your bracket. I can't tell you how much better these are than those cheap wall anchors that you get for free.

Next I drove the screws into the bracket using my cordless drill. (Finishing off at the end with a screwdriver.) I used two of the wimpy screws and two longer screws.

I repeated the process to hang the other bracket. Then followed the directions for hanging the blinds I bought.

I was able to hang the other side the same way and used my level line to make sure both blinds were hung at the same height.

Next I adjusted the cord stop and pulls to fit our windows. Because the blinds weren't custom made for our windows, they hung down below the window sill. I started by closing the blinds to the bottom of our windows. Then moved the small stop bead to the top of the cord.

 

Next I moved the pull knobs to a location in the middle of the blinds, added new knots to hold them there and then cut off the excess.

Next up on Pretty Handy Girl. How to hang curtains and a no-iron way to iron your curtains!

Plus, I have some more frugal changes that cost me – ummm – nothing! I added a big graphic element to the side wall (Tutorial HERE.) I know, sorry to tease you like that, but if you follow me on Twitter, I gave away the secret there.

Until then, I encourage you to embrace the New Year by making a small change to a room you really don't like.

• Try hanging a new picture.
• Try hanging new blinds or curtains.
• Cover up something you don't like with fabric.
• Buy some new throw pillows.
• Change around your accessories.
• Or switch out your bedding.

If you have a little more time and energy, It really is amazing what a new coat of paint can do for a room!

So, please don't wait. Make yourself happy! Change out something today! It doesn't mean you have to buy something new.

I am planning on swinging by our local Goodwill this week. You should have seen the lines of people donating their items before the new year (myself included!) I bet there are some treasures to be found this week.

Addendum: Monique sent me an email asking if she would be at risk of electrocuting herself when using the longer screws. Good question Monique. Here is my answer:

When I used the 2" screws I was screwing them into the studs. See THIS post to determine how to find a stud. It is about halfway down the post past the bench assembly. Electrical is not normally in a stud, occasionally it is run through a stud, but the 2" screw is actually only penetrating the stud about 1/2" to 3/4". Sometimes electrical wires are fed through a hole in the stud, however, it is normally centered in a 2" x 4" stud, so about 2" back. But, normally electrical is not run up near the ceiling through studs (where I was hanging the blinds). The electricity for your outlets is down near the outlets. The electrical for your ceiling light would run vertical from the switch and up through the ceiling. Most of those wires are either loose in the cavity between the studs or stapled to the middle of the stud (about 2" back).

If you are mounting your bracket into the drywall cavity (not a stud) I wouldn't use just the screw. That is where I would use the plastic toggler anchors that I showed above. The cavity in the drywall is 3 3/4" deep (the width of a stud.) Should an anchor touch the electrical (which that would be rare, it is sheathed in thick plastic and would normally flex away from the anchor. Plus, because it is plastic it wouldn't conduct electricity.)

In other words, long explanation short, you don't need to worry about shocking yourself if you are using anchors in the hollow areas and 2" screws into the studs.

Sharing this project at these FABULOUS link parties:

DIY Showoff  Project Parade

Skip to My Lou - Made by You Mondays

Between Naps on the Porch - Metamorphosis Mondays

Mad in Crafts - Mad Skills Party
Crazy Domestic Goddess - All Things Domestic
Tip Junkie - Handmade Projects Tues.

Coastal Charm - Nifty Thrifty Tues.

All Thingz Related- anything related Tuesdays

Creating a House of Grace- Twice owned Tuesdays

I'm Topsy Turvy - Topsy Turvy Tues.

Blue Cricket Design - Show and Tell Wednesday

Domestically Speaking - Power of Paint
The Tshirt Diaries - Upcycled Wednesday

Fine Craft Guild - Tutorial Link Party

Somewhat Simple.com - Strut Your Stuff

Shabby Chic Cottage - Transformation Thursdays

The Virginia House - We Can Do It Cheaper
Tools are for Women Too! - Modern Craftswoman

Fireflies and Jellybeans - Show Off Your Stuff

Decor Mamma - Frugalicious Friday

In the Fun Lane- Fresh Coat Fridays

Miss Mustard Seed - Furniture Feature Fridays

Tater Tots and Jello - Weekend Wrap Up Party

Funky Junk Interiors - Saturday Night Special 

A Little Knick Knack - Everything but the Kitchen Sink

  Shabby Nest - Frugal Friday

When is a Closet not a Closet? - When it is a Reading Nook!

This past weekend my husband took the boys camping. A free weekend – by myself – peace and quiet!

(insert sound of hammers, jigsaw, table saw, and more hammering)

Well, forget the quiet part, I decided to tackle another DIY project I had been thinking about for almost two years. I first got the idea after seeing this photo in Creative Home Magazine:

Kym, the homeowner, had turned her son's closet into a private nook. I thought, no problem, I'd complete this project in an easy 2 days. Afterall, how long can renovating one 6' x 2' closet take? During stopping points I could squeeze in a pedicure, swim some laps and possibly have a friend over for wine and some chat one evening.  Truth be told, it ended up taking a full 3 days (and nights)!

So, here is the abbreviated (press fast forward on the remote) version:

My three year old has two full size closets in his room. And, yet, his toys were always strewn around the room. Here is my "keeping it real" BEFORE picture:

Last year I took the doors off one of the closets and put up some curtains so he could have a little hideaway.

First task (after cleaning up all those toys, of course!) was removing hardware, demolition and patching holes (where I found I didn't know my own strength.)

Phew, glad that is done. Now comes the fun part, time to build!

First I cut all my wood to size, then built two frames. One for the base and one for the bench.

The base frame only had one center support since it didn't have to hold much weight. The bench seat frame had two center supports at 2' intervals.

I bought paint quality (almost smooth) plywood for the tops of the base and seat frames.

Here is a little trick I learned for scribing the profile of trim or other obstacles onto your board. In this instance, I used a compass and set the width to the same distance from the wall to the outside of my door casing. Then drew a line around the casing being careful to keep the compass perpendicular to the casing. Then you can cut out the profile with a jigsaw or coping hand saw.

See, perfect fit!

Next I built the second platform the same way (with the exception of the extra center supports.) I highly recommend priming as much of the wood as you can before nailing it into place. It is easier to prime wood on sawhorses.

I pulled out my levels (both a carpenter's level and laser level) and carefully leveled my bench platform before nailing it in. Then I used framing nails to nail the platform into the studs in the closet. (I promise to post about finding studs at a later date.)

Seriously, I really did level it! I even have the pictures to prove it! Because, at some point the right hand side of the bench must have shifted while I was nailing, which resulted in a slight slope. Shhhh, don't tell anyone! My lesson learned is that next time I will either screw the frame in place to hold it or put a brace underneath to keep it from slipping.

Somewhere during the process, I cut the foam cushion for the bench seat. If you haven't heard, the best way to cut foam is with an electric carving knife! (Huge thank you to my friend and neighbor Karen for the use of her 1970's electric carving knife.)

Next I installed all the moulding, wainscoting and trim. Did I mention that I bought all my trim and decorative moulding at the Habitat for Humanity ReStore? Super cheap at $.50 (yes, 50 cents!) per linear foot! My total for all the trim was $18, and I still have two 6 ft. pieces left.

Before I could prime I had to caulk all the seams. Did you know that some of the moulding in your home, especially crown moulding, is usually made up of several different pieces and then caulked to hide the edges?

This is the Pretty Handy Girl's tried-and-true caulking method:

1. Squeeze out your bead of caulk. 
2. Run your finger along the bead to smooth it (then wipe your finger off on a rag.)
3. Follow up with a slightly moist paper towel for a super smooth finish!

Once the caulk dried, I primed all the wood and wainscoting.

After trying some Benjamin Moore paint swatches, I settled on a deep navy blue called "Symphony Blue". I knew I'd need to use some tinted primer before trying to paint such a dark color on the light walls. Unfortunately our Ace Hardware was out of stock. Luckily George, my friendly Ace Hardware paint consultant, told me how to mix my own.

Isn't the marble effect pretty! I used 1 part paint to 3 parts primer and stirred it up really well.

Once everything is dry, the painting can begin. I always use two coats of paint. The only time I got away with one was by using Benjamin Moore Aura paint in our living room. But, I was going from a medium green to a slightly lighter green. Not a major change in color.

So, are you ready?? The drumroll please...

 Can't you hear the Symphonic Chords playing?

The copper wall sconce was also from the Habitat for Humanity ReStore. I scored that gem for  only $5! It has a cord that I snaked around the moulding and then plugged into the outlet just outside the closet. A tutorial on re-wiring the copper sconce with a white cord and adding a switch is poster here.

 Plenty of storage bins for all the toys a three year old can hoard.

Star pillows were super easy to make with cloth napkins and fabric I had on hand. 

Finally, a nook built for reading, sleepovers...

...or just hanging with big brother.

Look at some other closet transformations at Beneath My Heart's Closet Par-tay!

That's all folks! Bye-bye!

What's In Your Toolbox? - What Every DIYer (or Homeowner) Should Own

When I was 18, and bought my first car, and thought I was the coolest girl in town with a little zippy sportscar – sorry, just a little trip down memory lane.  My parents gave me my first tool kit. That tool kit is still with me today and I do use it a lot. The set has a series of sockets, crescent wrenches, interchangeable screwdriver bits, allen (hex) wrenches, needle nose pliers, and locking pliers.

That set got me through several repairs (both auto and home). Now, as a homeowner, I have found that there are a few more tools to have on hand.

You will likely want to look for a multi-piece set like this one:

This will give you a wide variety of tools for a low cost. If you want a deal, try shopping for these sets around Father's Day or Christmas. The set above was listed on Amazon.com for approximately $50 - $60.

Regardless if you are buying these items in a set or separate, these are the tools I recommend:

Homeowner essentials:

1. Hammer
2. Screwdrivers - Phillips head and a flat (straight or slotted) head. Try to buy a small and medium size of each.
3. Allen (Hex) Wrenches in several sizes
4. Adjustable Crescent Wrenches - I suggest buying at least two. One 6" and one 10"
5. Slip Joint Pliers (handy for overall gripping)
6. Needle-nosed pliers
7. Vice grips (Locking pliers)
8. Tape Measure
9. Level - 24" is preferrable
10. Utility knife (mat knife)
11. Safety glasses
12. 12" Handsaw
13. Stud Finder
14. Flashlight
15. Pry bar (must have a flat sharp side and the other side a notch for pulling nails.)
16. Tool box or case to keep all of the above in 
17. My favorite DIY guide to my home: Home Depot's Home Improvement 1-2-3 - the best $15 I ever spent!

 Screwdriver bits:

 

Last but not least, the most indispensable tool I've ever owned:
Cordless Drill with screwdriver bits and a small set of drill bits 

For Electrical DIY:

1. Wiring instruction book or guide
2. Wire Cutters/Strippers
3. Electrical Current tester 
• You only need the simple tester with two probes and an indicator light to test if the power is on. 

For the committed DIYer:

1. Palm sander
2. Carpenter's square
3. Staple gun
4. Power Circular Saw 
• Be sure to hold one in the store and feel how the grip feels in your hand. This is especially important as a woman with a smaller hand size. (more on power tool shopping in another blog post - coming soon!)
5. Jig Saw
6. Saw Horses or Folding Work Bench
7. Clamps - A Variety of Adjustable Clamps and Clips

I hope this list gives you some good information so you won't feel overwhelmed when buying tools. Definitely ask a sales person for help or opinions. Don't tell them you are new at this. Ask them for the tool they would purchase if they were buying one for their shop. You should aim to buy a quality tool (especially power tools) that will last your lifetime. A cheap tool will either break or not have the power to do the job you need it to do. However, you don't need to buy top of the line or break the bank to get a good tool.

Savings Tip: Many of the big box home improvement stores will usually price match tools that are priced cheaper at a competitor if it is the same make and model, plus take 10% off the price. Be sure to bring the ad with you or they will need to call or look up the price online.

Home Depots price guarantee:  

NOBODY BEATS OUR PRICES
If any competitor tries, we'll beat their price by 10%. Guaranteed.*
*If you find a current lower price on an identical, in-stock item from any retailer, we will match the price and beat it by 10%. Excludes special orders, bid pricing, volume discounts, open-box merchandise, labor and installation, sales tax, rebate and free offers, typographical errors and online purchases. 

Lowe's price guarantee: 

Everyday Low Prices, Guaranteed

We guarantee our everyday competitive prices. If you find a verifiable lower everyday or advertised price on an identical stock item at any local retail competitor that has the item in stock, we'll beat their price by 10% when you buy from us. Just bring us the competitor's current ad or we'll call to verify the item's price that you have found. Cash (charge card) and carry purchases only. Competitor's closeout, special order, discontinued, clearance, liquidation and damaged items are excluded from this offer. On percent-off sales, Lowe's will match the competitor's percent-off offer. Limited to reasonable quantities for homeowner and one-house order quantities for cash and carry contractors. Current in-store price, if lower, overrides Lowe's advertised price. Price guarantee honored at all Lowe's retail locations. Labor charges for product installation are excluded from our price guarantee offer in our stores with an Installed Sales Program. Visit store for complete details.

Sear's price guarantee:

If you find a lower price on an identical branded item with the same features (in Home Electronics identical brand and model number) currently available for sale at another local competitor retail store, Sears will match that price plus, give you 10% of the difference. Just bring in the original advertisement to a sales associate at the time of, or within 14 days after, your purchase. More fine print...

Happy Shopping!