Decoupaging the Dresser Panel with Wrapping Paper

Here is the decoupage tutorial I promised you from the Diva of a Dresser makeover.

Materials:
Wrapping Paper, Decorative Paper or Wall Paper
Fresh Sharp Exacto blade
Mod Podge
Spray Adhesive (optional)
Paint Brush

I started by unrolling a section of wrapping paper large enough to fit in the side pane. Using my fingernail (hmmm, maybe that is why I can never grow my nails longer), I scored the edges of the wrapping paper along the edges of the panel.

Next I used a fresh exacto blade and carefully cut along the score lines in the wrapping paper (while still holding it against the dresser.) Set the paper panel aside.

Using my paint brush, I worked quickly to put a coating of mod podge inside the panel on the dresser, while being careful to cover every square inch.

Center the wrapping paper on top of your modge podged dresser panel and smooth the paper with your hands, working from the inside center of the panel out. Getting the wrapping paper lined up in the panel was probably the trickiest part of the process.

Then I followed up with a top coating of Modge Podge to seal the paper. I knew the paper was going to wrinkle, and I convinced myself that I was okay with it (being a perfectionist is tough sometimes.)

However, if you want to avoid the wrinkling, I tested the same wrapping paper on a wooden "W" and used spray mount adhesive on the back of the paper instead of Mod Podge.

After top coating the "W" with mod podge there were still a few wrinkles but not as bad as the dresser. (See, I couldn't squash my perfectionist ways. I had to solve that minor imperfection.)

This concludes my decoupage tutorial, but if you are curious about the lengths I took to give my decoupaged panel some age, keep reading.

I didn't like the stark black and white paper on my dresser. In the middle of drinking my instant coffee I had a lightbulb moment!

I decided to rub the instant coffee bag all over the panel. It worked, and gave the panel a nice warm "instant" age.

Later that day, I added my beachy blue glaze (all the while not being able to figure out why I kept smelling coffee. Duh!)

I played with adding the glaze and wiping some off until I achieved a hazy blue look with the wrapping paper design peeking through.

If you missed it or wanted to read more about this Diva of a Dresser makeover, click here.

Using Asphaltum Glaze to Antique Furniture

I've seen several talented furniture rescuers (Miss Mustard Seed comes to mind) using Valspar Asphaltum glaze on their shabby chic creations.

Valspar Asphaltum Antiquing Glaze

I have to tell you right now, I had not been very successful with this glaze. Every time I tried to use it, I ended up wiping it all off and ditching my efforts. However, I finally figured out the technique for using this glaze (on this project). The trick can be summed up with "less is more"!

I poured out a quarter size dollop of the Valspar Asphaltum glaze.

Then gently dab your paint brush into it. Dab almost all of the glaze off onto a rag.

Next, lightly brush the glaze over your surface. The picture below shows using TOO MUCH!

Too Much Glaze

This is the amount you should see when you drag your paintbrush over the surface. Very dry brush and hardly any glaze on it:

Just Right

If the results still look too dark to you, go ahead and wipe the glaze off with a rag.

You can also drag your brush sideways. This works especially well on furniture edges.

Just Right, Sideways Dragging

Here are the results of using the asphaltum glaze on this dresser.

Now that you've seen the technique, what do you want to try this out on?

Adding Decorative Stencil to Dresser

The other day I shared with you my french provincial dresser makeover. I dubbed her the Diva Dresser because of all the changes she pushed me to make. But, in the end I really liked what she wanted.

One of the tutorials that I promised you was how to add the decorative stencil on the top of the dresser.

I used the wrapping paper decoupaged on the side to help me create the design.

I scanned a section of the leftover wrapping paper and enlarged the scan 500% of the original size.

I opened the scan in Photoshop (but you could probably use any editing software.)

 

And cropped in on one quarter of the medallion.

In Photoshop, under Mode, I chose Image Size.

Then I changed the size of my image to the size that I wanted the stencil to be. In my case, I wanted it to be about 6 inches x 6 inches.

 

Then I printed out the design onto paper and added a few flourishes to the edges.

 

Using a soft pencil (#2 will work fine), I rubbed the edge of the pencil on the back of my printout until all of the back side of my stencil was covered.

 

Then I cut around my stencil and laid it onto the top of the dresser. Pressing firmly, I traced around all the edges of my design.

 

When you remove the printout, you should be left with your design in pencil transferred to the surface. (I use this technique all the time to transfer type and other designs onto an object.)

I chose to work with a sharpie pen and traced the design.

Then filled in my design with the marker.

Because I knew I was going to glaze over my stencil, I didn't mind that you could see the pen marks. If I wasn't going to glaze over my design, I probably would have use flat black acrylic paint instead.

 

Then I proceeded to glaze many colors of blue/gray over my dresser.

Until I was left with this!

 

I put one stencil in each back corner. And love how easy it was to do. And of course how beautiful it looks!

Do you have anything you want to add a sharpie stencil too? Maybe something you can monogram? I encourage you to try it!

The Perfect Color for a Craig's List Dresser

I am in love with those adorable french provincial dressers. The flourishy handles are what really get my heart pounding.

When I saw this dresser on Craig's List for $35 dollars, I pounced!

 Disclaimer: I stole this picture from the previous owner's Craig's List Ad.

Oooo baby, don't you just love that faux gold outlined accents and off white laminate top. Yes, I said laminate. But I wasn't afraid of it. For $35 who cares if it gets messed up. If you never take the risk, you'll never learn anything new, right?!

The drawers were still in good shape, but a little loose around the joints, so I squirted my new favorite Gorilla Glue into the joints and clamped lassoed them up!

Then I used newspaper to protect any of the areas I didn't want sprayed.

After sanding all the surfaces to rough them up, I put a coat of primer on everything. Loving that crisp clean white, but the dresser told me to "Keep Calm and Carry On."  So, I cooperated and continued on to another color.

Next, I sprayed Rustoleum Heirloom White and distressed the surface with a wood stain.

The drawer pulls got their own treatment of automotive primer followed by Oil Rubbed Bronze paint. Thank goodness they were happy with their new color because – I'm telling you – that dresser was certainly acting like a diva! She was still demanding a new color.

I have seen many Nantucket Fog makeovers and decided to make a run to Ace Hardware to pick up a small sample of that blue gray color. And I grabbed a can of artistic glaze.

After two coats of the Nantucket Fog glaze, that little dresser still wanted something else. Sheesh! So I pulled out some leftover blue paint from my dormer window shutters.

Finally, she shut up! It's a good thing too, because I LOVE this color. I love it so much that I hauled my tired hiney back over to Ace to match the color just for you.

Does anyone else get starry eyed and entranced by all these fabulous colors?

The closest match is Buxom Blue from Benjamin Moore. Not too far off from Nantucket Fog, but you know those divas they want what they want!

Now, all important divas need something to wear that gets them noticed. Thus, I decoupaged some wrapping paper on the side (tutorial is here.)

And then because I liked the pattern so much, I blew it up and added it to two corners of the dresser top (tutorial for adding a sharpie stencil.)

I added some beachy blue glaze over the wrapping paper and the top graphic.

And I have to tell you that – halleluiah – I finally figured out the proper technique when using the valspar glazes (the tutorial is here.)

I finished up with three coats of a semi-gloss polyurethane.

And here is that stunningly beautiful diva of a dresser. Transformed from Cinderella to the Belle of the ball!

Isn't it amazing what a little oil rubbed bronze can do!

 

 Hard to believe this was wrapping paper in a previous life!

 Peek-a-boo I see a cute stencil.

Now, I have to convince Pretty Handsome Guy that our master bedroom furniture doesn't have to be all matchy matchy!

 Because I LOVE our Pottery Barn Sleigh Bed. 

But not the matching dresser.

 I love the new-old dresser! What do you think?

Any helpful hints on using Jedi mind tricks on unsuspecting Pretty Handsome Guy?

Entered into the: